Epson Pro EX11000 3-Chip 3LCD Full HD 1080p Wireless Laser Projector – 4600 Lumens, Miracast, 1.6x Zoom

The Epson Pro EX11000 is a 4,600-lumen Full HD wireless 3LCD laser projector for businesses, schools, and hybrid meeting rooms. It combines a 20,000-hour laser light source with Miracast screen mirroring, a 1.6x zoom lens, LAN control, and a built-in 16W speaker.

Deep-Dive Story & Problem/Solution

Hybrid Meetings Fail When the Display Is Dim or Hard to Connect

In a hybrid meeting, remote participants and shared content appear on the room display. If that image is washed out by daylight, or presenters lose minutes finding an adapter, the meeting suffers for everyone.

The EX11000 addresses both points. Its 3LCD laser engine produces 4,600 lumens of color and white brightness, so video and slides stay clear with the lights on. Built-in wireless and Miracast allow laptops and mobile devices to connect without cables.

The laser source is rated for 20,000 hours and reaches working brightness quickly, so the projector is ready when the meeting starts.

Bright, Accurate Full HD Laser Image

Three LCD chips project red, green, and blue continuously for consistent color. The 1.32–2.12:1 lens supports images from about 31 to 310 inches.

Easy to Install and Share

Horizontal and vertical keystone correction, dual HDMI, VGA, RJ-45, RS-232, and USB connections fit most rooms. Noise is 37dB in normal mode and 27dB in Eco, and the unit weighs 9.5 lbs.

Setup Instructions

How to Set Up the Epson Pro EX11000

1. Place the projector 9.6 to 15.4 feet from a 100-inch screen.
2. Connect by HDMI or select Screen Mirroring for Miracast devices.
3. Adjust zoom and focus, then apply keystone correction if needed.
4. Connect the projector to the network for monitoring and scheduling.