WD_BLACK SN850P 1TB NVMe SSD for PS5 (WDBBYV0010BNC-WRSN) – Officially Licensed, Heatsink, Up to 7,300MB/s

Officially licensed PS5 expansion storage that installs in minutes.

The WD_BLACK SN850P 1TB is an officially licensed PCIe Gen4 NVMe M.2 2280 SSD for PlayStation 5. Its integrated heatsink is optimized for the PS5 expansion bay, and reads of up to 7,300MB/s let PS5 games load and play directly from the drive, nearly doubling the console’s usable game storage.

The Simplest Way to Add Fast Storage to a PS5

The PS5’s internal SSD fills up fast, but choosing an aftermarket drive means checking speed requirements, sourcing a heatsink and confirming fit. Mistakes can mean throttling or a drive that will not fit the bay.

The SN850P is officially licensed for PS5 and arrives with an integrated heatsink designed for the console. It installs in minutes and runs PS5 games at full speed, adding 1TB of fast storage with no guesswork.

Play PS5 Games Directly From the Drive

With up to 7,300MB/s reads, the SN850P meets PS5 performance requirements, so games load and stream assets as quickly as they do from internal storage.

Designed to Stay Cool

The integrated heatsink manages temperatures during long gaming sessions and big downloads, helping maintain consistent performance.

Setup Instructions

How to Install the WD_BLACK SN850P 1TB in Your PS5

1. Update the PS5 system software, turn the console fully off and unplug it.
2. Remove the console cover and the M.2 expansion slot cover.
3. Insert the SN850P, set the spacer to the 80mm position and tighten the screw; refit the covers.
4. Power on and follow the prompt to format the drive, then install or move games.