Intel SSD D3-S4510 240GB 2.5″ SATA Enterprise SSD (SSDSC2KB240G801) – 6Gb/s, 3D TLC, Power-Loss Protection

An enterprise-grade server boot drive with built-in data protection.

The Intel SSD D3-S4510 240GB is a 2.5-inch, 7mm SATA 6Gb/s enterprise SSD with Intel 64-layer 3D TLC NAND. Its capacity and power-loss protection make it an ideal boot drive for servers and hypervisors, delivering up to 560MB/s reads, AES 256-bit encryption and a 2-million-hour MTBF.

Why Server Boot Drives Deserve Enterprise SSDs

Server boot volumes hold the OS, hypervisor and logs. Consumer drives used for this role can fail without warning and lack protection against data loss during power outages.

The D3-S4510 240GB brings enterprise reliability to the boot role. Mirror two drives in RAID 1 for redundancy and benefit from power-loss protection and consistent firmware designed for 24/7 servers.

Fast, Reliable Boot Volumes

Up to 560MB/s reads mean quick server boots and responsive OS operations, while consistent latency keeps management tasks smooth.

Enterprise Protection

Power-loss imminent protection, end-to-end data protection and AES 256-bit encryption protect the OS volume, with a 2-million-hour MTBF.

Setup Instructions

How to Install the Intel D3-S4510 240GB

1. Back up data and check your server’s compatibility guidance for SATA SSDs.
2. Mount the SSD in a 2.5-inch server carrier or a 3.5-inch adapter tray.
3. Insert it into a SATA or SAS/SATA bay; hot-plug if the backplane supports it.
4. Configure the drive in your RAID controller or OS and create the volume.