ASRock H510M-HDV/M.2 SE Micro-ATX Motherboard (90-MXBM00-A0UAYZ) — LGA 1200, DDR4 3200, HDMI/DVI/VGA

A low-cost LGA 1200 board for office PCs, school systems and budget upgrades.

The ASRock H510M-HDV/M.2 SE (part 90-MXBM00-A0UAYZ) is a Micro-ATX motherboard for Intel 10th and 11th Gen processors on LGA 1200. It supports up to 64GB of DDR4, one M.2 NVMe slot, four SATA3 ports and HDMI, DVI-D and D-Sub outputs. It suits budget office, school and home PCs.

Reliable Basics for Everyday Intel Desktops

Office and school PCs need to boot reliably, run productivity software and connect to whatever monitors are already on the desk. Paying for gaming features adds cost without improving any of that.

The H510M-HDV/M.2 SE provides the essentials: support for 10th and 11th Gen Intel processors, dual-channel DDR4 up to 64GB, an M.2 slot for a fast NVMe boot drive, and three video outputs that cover modern and legacy displays.

Fast Boot Storage on a Budget

The Ultra M.2 slot supports NVMe SSDs for quick boot and application load times, and four SATA3 ports handle hard drives or SATA SSDs for bulk files. A PCIe x16 slot and a PCIe x1 slot allow a graphics card or network card upgrade.

Display Flexibility for Office Setups

HDMI, DVI-D and D-Sub outputs run from Intel UHD integrated graphics, so most offices can reuse existing monitors without adapters. USB 3.2 Gen 1 and USB 2.0 ports, Gigabit LAN and HD audio cover daily connectivity.

Setup Instructions

How to Install the ASRock H510M-HDV/M.2 SE

1. Install the LGA 1200 processor and cooler, then fit DDR4 memory in both DIMM slots and your M.2 SSD before mounting the board.
2. Mount the board in the case and connect the 24-pin ATX, CPU power and front-panel headers.
3. Connect SATA drives, then connect your monitor to the HDMI, DVI-D or D-Sub port (or install a graphics card).
4. Power on into the UEFI BIOS, enable the XMP/EXPO memory profile, update the BIOS using Instant Flash, and install ASRock chipset, LAN and audio drivers.