Ubiquiti EdgeSwitch 5XP 5-Port Gigabit Managed Switch with 24V PoE (UBES5XP) – 4x 24V passive PoE

The Ubiquiti EdgeSwitch 5XP 5-Port Gigabit Managed Switch with 24V PoE is a managed PoE switch with 5x Gigabit RJ45. It supplies 4x 24V passive PoE power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers. Management features help segment and prioritise network traffic.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Ubiquiti EdgeSwitch 5XP 5-Port Gigabit Managed Switch with 24V PoE delivers 4x 24V passive PoE power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 5x Gigabit RJ45. PoE: 4x 24V passive PoE.

Management and Installation

VLANs, QoS and monitoring from a central management tool. Mounts under desks, on walls or behind screens. EdgeSwitch / UISP management.

Setup Instructions

How to Set Up the Ubiquiti EdgeSwitch 5XP 5-Port Gigabit Managed Switch with 24V PoE

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.