Ubiquiti UniFi Switch Pro 8 PoE (USW-Pro-8-PoE) (UBUSWPRO8POE) – 120W PoE, 2x 10G SFP+, Layer 3 Managed

The Ubiquiti UniFi Switch Pro 8 PoE (USW-Pro-8-PoE) is a Layer 3 managed PoE switch with 8x Gigabit RJ45 PoE (PoE+/PoE++) and 2x 10G SFP+ uplinks. It supplies 8x PoE (4 PoE++) power from a 120W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Ubiquiti UniFi Switch Pro 8 PoE (USW-Pro-8-PoE) delivers 8x PoE (4 PoE++) power from a 120W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit RJ45 PoE (PoE+/PoE++). Uplinks: 2x 10G SFP+. PoE: 8x PoE (4 PoE++), 120W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Routes between VLANs and subnets directly on the switch. Mounts under desks, on walls or behind screens. UniFi Network application management.

Setup Instructions

How to Set Up the Ubiquiti UniFi Switch Pro 8 PoE (USW-Pro-8-PoE)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.