HP DesignJet T210 24-Inch Large Format Plotter Printer (8AG32T) – Wireless, Roll Feed, Automatic Cutter

The HP DesignJet T210 is a 24-inch large format plotter printer for architects, engineers, and construction professionals. It prints an A1 drawing in about 45 seconds at up to 2400 x 1200 optimized dpi, feeds from a roll with an automatic cutter, and connects through Wi-Fi, Gigabit Ethernet, or USB.

Deep-Dive Story & Problem/Solution

Small Design Teams Need Plots Without a Print Room

Sole practitioners and small studios often rely on outside print services for A1 drawings. Each revision costs time, and last-minute changes before a site meeting are difficult to print.

The DesignJet T210 is sized and priced for a small office. It prints CAD lines with fine detail using HP 712 inks, with dye-based color and pigment black for sharp text.

HP Click software sends PDF, JPEG, and HP-GL/2 files in one click, and the HP Smart app allows printing from a phone on site.

Media Handling

The printer takes rolls up to 24 inches wide and single sheets through the top feed. An automatic sheet feeder for A3/A4 stacks is available as an optional accessory.

Efficient Ink Use

HP reports up to 95% less ink used for routine maintenance than comparable plotters, helping control running costs.

Setup Instructions

How to Set Up the HP DesignJet T210

1. Unpack the printer and place it on a desk or assemble the optional stand.
2. Install the four HP 712 ink cartridges and the print head, then run the alignment.
3. Load a roll of paper onto the spindle and feed it into the printer.
4. Connect by Wi-Fi or Ethernet and install the driver and HP Click software.