WD Blue SN570 1TB NVMe SSD (WDS100T3B0C) – PCIe Gen3 x4 M.2 2280, Up to 3,500MB/s

Six times the speed of SATA for everyday PCs and creative laptops.

The WD Blue SN570 1TB is an M.2 2280 PCIe Gen3 x4 NVMe SSD for laptops and desktops. Reading at up to 3,500MB/s and writing at up to 3,000MB/s, with a 600 TBW endurance rating, it gives creators, students and professionals fast boots, quick app loading and smooth handling of large files.

Why Everyday PCs Benefit From NVMe

Large photo libraries, 4K video clips and modern apps move a lot of data. On a hard drive or SATA SSD, opening projects, exporting files and loading software means waiting on the storage interface.

The SN570 connects through PCIe Gen3 x4 for up to 3,500MB/s. It delivers that speed with low power draw and a single-sided design, making it a practical upgrade for both desktops and thin laptops.

Fast for Creative and Everyday Work

Sequential reads up to 3,500MB/s make photo browsing, video scrubbing and file transfers quick. Random performance of up to 460K IOPS keeps everyday multitasking responsive.

Efficient and Reliable

The SN570 uses an efficient WD controller with Host Memory Buffer, keeping power and heat low in laptops. Its 600 TBW rating and 1.5-million-hour MTTF support long-term reliability.

Setup Instructions

How to Install the WD Blue SN570 1TB

1. Shut down and unplug the computer; for laptops, disconnect the battery if accessible.
2. Locate the M.2 2280 M-key slot that supports NVMe and remove any cover.
3. Insert the SSD at an angle, press it flat and secure it with the M.2 screw.
4. Boot up and clone your drive, install Windows, or initialize it in Disk Management as storage.