Solidigm D3-S4620 480GB 2.5″ SATA Enterprise SSD (SSDSC2KG480GZ01) – Mixed Use, 6Gb/s, 3D TLC

Mixed-use SATA endurance for boot, logging and write-heavier server roles.

The Solidigm D3-S4620 480GB is a 2.5-inch, 7mm SATA 6Gb/s enterprise SSD designed for mixed-use workloads. With 144-layer TLC NAND, power-loss protection and higher write endurance than read-intensive drives, it suits server boot volumes, logging, caching and transactional applications on SATA platforms.

Why Boot and Log Drives Need Mixed-Use Endurance

Server boot volumes, logs and small transactional databases see steady write activity day after day. Read-intensive SSDs can wear faster than expected in these roles.

The D3-S4620 is rated for mixed-use workloads, providing more write endurance while keeping full SATA compatibility. It is a reliable choice for boot mirrors, logging and write-heavier applications on existing servers.

Reliable Performance for Mixed Workloads

Enterprise firmware delivers consistent latency during mixed read/write activity, keeping boot volumes, logs and transactional apps responsive.

Enterprise Data Protection

Power-loss imminent protection, end-to-end data integrity and a 2-million-hour MTBF support 24/7 server operation.

Setup Instructions

How to Install the Solidigm D3-S4620 480GB

1. Check server compatibility guidance and back up data if replacing an existing drive.
2. Mount the SSD in a 2.5-inch server drive carrier.
3. Insert it into a SATA or SAS/SATA bay; hot-plug where supported.
4. Create a boot mirror (RAID 1) or configure the drive as a log or data volume.