HyperDrive GEN2 16-in-1 USB-C Docking Station (HD-G216) – 100W, 3 Displays

The HyperDrive GEN2 16-in-1 USB-C Docking Station connects to your laptop over USB-C 3.2 Gen 2 and adds HDMI, DisplayPort, VGA, USB-A, USB-C, Gigabit Ethernet and audio ports. It passes up to 100W of USB-C charging through to your laptop and drives up to 3 displays. It is built for home offices, hot desks and hybrid teams.

One connection, every port you need.

One Cable for Your Whole Desk Setup

Plugging a charger, monitor cables, a network cable and several USB devices into a laptop every time you sit down wastes time and wears out its ports.

The HyperDrive GEN2 16-in-1 USB-C Docking Station connects through USB-C 3.2 Gen 2, passes up to 100W of USB-C charging through to your laptop, drives up to 3 displays and adds HDMI, DisplayPort, VGA, USB-A, USB-C, Gigabit Ethernet and audio ports. Unplug one cable and the laptop is ready to go.

Multi-Display Support

Display support: Up to 3 displays (4K 60Hz single). Video outputs: 2x HDMI, 1x DisplayPort, 1x VGA. Display count and resolution depend on your laptop’s graphics and connection.

Ports for Every Peripheral

USB connectivity: 2x USB-A 10Gbps, 3x USB-A 2.0; 1x USB-C 10Gbps. It also includes Gigabit Ethernet for wired networking and 3.5mm combo, digital coax, TOSLINK optical audio.

Setup Instructions

How to Set Up the HyperDrive GEN2 16-in-1 USB-C Docking Station

1. Connect the power adapter to the dock and a wall outlet.
2. Connect your monitors to the dock’s video outputs (2x HDMI, 1x DisplayPort, 1x VGA).
3. Plug in your keyboard, mouse, Ethernet cable and other USB devices.
4. Connect the dock to your laptop’s USB-C port with the included cable.
5. Open your display settings to arrange and extend your monitors.