TP-Link Omada SG3210XHP-M2 10-Port 2.5G L2+ Managed Switch with 8-Port PoE+ (SG3210XHP-M2) – 240W PoE, 2x 10G SFP+

The TP-Link Omada SG3210XHP-M2 10-Port 2.5G L2+ Managed Switch with 8-Port PoE+ is an L2+ managed PoE switch with 8x 2.5G PoE+ and 2x 10G SFP+ uplinks. It supplies 8x PoE+ power from a 240W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

More ports, less clutter.

Power and Connect Devices Over One Cable

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link Omada SG3210XHP-M2 10-Port 2.5G L2+ Managed Switch with 8-Port PoE+ delivers 8x PoE+ power from a 240W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x 2.5G PoE+. Uplinks: 2x 10G SFP+. PoE: 8x PoE+, 240W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Inter-VLAN routing, ACLs and advanced QoS for business networks. Fits on a desk or shelf, or mounts on a wall. Omada SDN management.

Setup Instructions

How to Set Up the TP-Link Omada SG3210XHP-M2 10-Port 2.5G L2+ Managed Switch with 8-Port PoE+

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.