Cisco Meraki MS130-8P 8-Port Gigabit PoE+ Cloud-Managed Switch (CIMS1308PHW) – 120W PoE, 2x 1G SFP

The Cisco Meraki MS130-8P 8-Port Gigabit PoE+ Cloud-Managed Switch is a Cloud-managed PoE switch with 8x Gigabit PoE+ and 2x 1G SFP uplinks. It supplies 8x PoE+ power from a 120W budget for access points, IP cameras and VoIP phones. It is built for growing small and medium business networks. Management runs through a cloud dashboard for remote visibility.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Meraki MS130-8P 8-Port Gigabit PoE+ Cloud-Managed Switch delivers 8x PoE+ power from a 120W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE+. Uplinks: 2x 1G SFP. PoE: 8x PoE+, 120W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Configure and monitor the switch from a web dashboard anywhere. Fits on a desk or shelf, or mounts on a wall. Meraki Dashboard cloud management and Hardware only (licence required).

Setup Instructions

How to Set Up the Cisco Meraki MS130-8P 8-Port Gigabit PoE+ Cloud-Managed Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.