Cisco SG220-50P 50-Port Gigabit PoE+ Smart Switch (CISG22050PK9) – 375W PoE, 2x Gigabit RJ45/SFP combo

The Cisco SG220-50P 50-Port Gigabit PoE+ Smart Switch is a smart managed PoE switch with 48x Gigabit PoE+ and 2x Gigabit RJ45/SFP combo uplinks. It supplies 48x PoE+ power from a 375W budget for access points, IP cameras and VoIP phones. It is built for growing small and medium business networks. Management features help segment and prioritise network traffic.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco SG220-50P 50-Port Gigabit PoE+ Smart Switch delivers 48x PoE+ power from a 375W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 48x Gigabit PoE+. Uplinks: 2x Gigabit RJ45/SFP combo. PoE: 48x PoE+, 375W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

VLANs, QoS, link aggregation and monitoring for growing networks. Installs cleanly in standard network racks and cabinets.

Setup Instructions

How to Set Up the Cisco SG220-50P 50-Port Gigabit PoE+ Smart Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.