Lilliput 12G-SDI SFP Optical Transmitter Module (12G-SFP-LC-TX) – Fiber, LC

The Lilliput 12G-SDI SFP Optical Transmitter Module is a 12G-SDI optical SFP module for fiber (LC) links. It connects SDI production equipment over fiber for long cable runs between cameras, switchers and control rooms. It uses an LC connector. Transmit (TX) module for Lilliput SDI devices.

Plug in, link up.

Extend SDI Video Over Fiber

SDI copper cables lose signal quality over long runs, limiting where cameras and monitors can go.

The Lilliput 12G-SDI SFP Optical Transmitter Module provides 12G-SDI over fiber (LC), plugging straight into a compatible port.

Optical and Electrical Specifications

Form factor: SFP. Speed: 12G-SDI. Media: Fiber (LC). Connector: LC.

Installation and Compatibility

Insert the module into a matching port until it clicks, then connect the cable. Use matching module types on both ends of the link.

Setup Instructions

How to Install the Lilliput 12G-SDI SFP Optical Transmitter Module

1. Check that the host port supports this module type and speed.
2. Remove the dust cap and insert the module until it latches.
3. Connect the fiber or copper cable.
4. Confirm the link LED and port status in the switch or device interface.