TRENDnet TI-F11SFP Hardened Industrial 100/1000Base-T to SFP Media Converter (TI-F11SFP) – Industrial Media Converter

The TRENDnet TI-F11SFP is a hardened industrial media converter that links a 10/100/1000 RJ45 device to fiber through an SFP slot, designed for DIN-rail installation in factories, outdoor cabinets and transportation sites where standard office converters cannot handle the environment.

Built for the job, simple to install.

Extend Ethernet Over Fiber

Copper Ethernet stops at around 100 meters, which is not enough between buildings, floors or industrial areas.

The TRENDnet TI-F11SFP Hardened Industrial 100/1000Base-T to SFP Media Converter bridges copper and fiber so the network can reach further.

Key Specifications

Product Type: Hardened industrial media converter. Copper Port: 1x 10/100/1000 RJ45. Fiber Port: 1x 100/1000Base-X SFP slot. Mounting: DIN-rail.

Getting the Most From It

Supports 100Base-FX and 1000Base-X SFP modules. Installs in industrial control cabinets.

Setup Instructions

How to Set Up the TRENDnet TI-F11SFP Hardened Industrial 100/1000Base-T to SFP Media Converter

1. Unpack the device and check the contents.
2. Install it in the intended location following the guide.
3. Connect cables and power (if required).
4. Confirm operation through status LEDs or the management interface.