Cisco-Linksys E2000 Advanced Wireless-N Gigabit Router – Selectable Dual-Band, Up to 300 Mbps

Wireless-N speed and coverage for small homes and secondary networks.

The Cisco-Linksys E2000 is a Wireless-N router with wireless speeds up to 300 Mbps, and it provides 1 x Gigabit WAN port and 4 x Gigabit LAN ports. It suits small homes and secondary networks. Setup is handled through a simple web interface, with WPA2 security and a guest network.

Why Older Routers Slow Down a Busy Network

Most homes and small offices now run dozens of connected devices: phones, laptops, TVs, cameras and smart speakers. Older routers share airtime inefficiently, so every new device slows the rest, and walls or floors leave weak spots.

The E2000 uses Wireless-N technology to move more data to more devices at once. Dual-band selection lets you choose 2.4 GHz for range or 5 GHz for less interference.

Built-in security features such as WPA2/WPA3 encryption, a guest network and firmware updates help keep the network protected without extra hardware.

Wired Ports for Fast, Stable Connections

The E2000 provides 1 x Gigabit WAN port and 4 x Gigabit LAN ports. Wired connections give consoles, desktops, NAS drives and TVs the most consistent speed and free up wireless airtime for mobile devices.

Coverage and Expansion

For larger spaces, the E2000 can be paired with compatible extenders or mesh points to extend coverage under one network name.

How to Set Up the Cisco-Linksys E2000

1. Connect the router WAN/internet port to your modem or ONT with an Ethernet cable, and power on the router.
2. Connect to the default Wi-Fi network or a LAN port, then open the setup app or web interface shown on the router label.
3. Follow the setup wizard to detect your internet connection, set a new Wi-Fi name and password, and create an admin password.
4. Update the firmware, enable the guest network and security features, and position the router centrally and off the floor for best coverage.