Seagate IronWolf 8TB NAS Hard Drive (ST8000VN004) – SATA 6Gb/s, 7200 RPM, 256MB Cache, CMR

The Seagate IronWolf 8TB (ST8000VN004) is a 3.5-inch CMR NAS hard drive for home users, homelabs and small offices running NAS systems with up to 8 bays. IronWolf Health Management, RV sensors and 7200 RPM operation keep RAID storage reliable around the clock.

NAS storage that watches its own health.

Why NAS Systems Need NAS-Specific Drives

NAS drives spin 24/7 next to other drives, absorbing vibration and heat that desktop drives are not built to tolerate. SMR desktop drives add a further risk by slowing down sharply during RAID rebuilds.

The Seagate IronWolf 8TB is designed for NAS. CMR recording keeps rebuilds predictable, RV sensors counter vibration, and IronWolf Health Management reports drive condition inside compatible NAS software. At 8TB, it gives growing NAS deployments room for several years of data growth per bay.

IronWolf Health Management

IHM integrates with Synology DSM, QNAP QTS and Asustor ADM to run health checks and give prevention, intervention and recovery recommendations before problems become data loss.

Built for Multi-Bay Enclosures

RV sensors and NAS-tuned firmware maintain performance in NAS systems with up to 8 bays and a 180TB/year workload rating.

Setup Instructions

How to Install the Seagate IronWolf 8TB

1. Check your NAS compatibility list and power down unless hot-swap is supported.
2. Mount the drive in a tray or bay.
3. Power on and let the NAS detect the drive, then create or expand a storage pool.
4. Enable IronWolf Health Management and scheduled S.M.A.R.T. tests in your NAS software.