HPE Aruba Networking Instant On 1960 48G PoE 2XGT 2SFP+ Switch (JL809A) – 48x PoE, 2x 10GBASE-T + 2x 10G SFP+, L2+ Managed

The HPE Aruba Networking Instant On 1960 48G PoE 2XGT 2SFP+ Switch is an L2+ managed PoE switch with 48x Gigabit RJ45 PoE and 2x 10GBASE-T + 2x 10G SFP+ uplinks. It supplies 48x PoE power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The HPE Aruba Networking Instant On 1960 48G PoE 2XGT 2SFP+ Switch delivers 48x PoE power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 48x Gigabit RJ45 PoE. Uplinks: 2x 10GBASE-T + 2x 10G SFP+. PoE: 48x PoE. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Inter-VLAN routing, ACLs and advanced QoS for business networks. Installs cleanly in standard network racks and cabinets. Stackable Instant On 1960 series.

Setup Instructions

How to Set Up the HPE Aruba Networking Instant On 1960 48G PoE 2XGT 2SFP+ Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.