QNAP QXG-10G1T Single-Port 10GBASE-T PCIe Network Expansion Card (QXG-10G1T) – Marvell AQtion (10GBASE-T), PCIe Gen3 x4 low-profile card

The QNAP QXG-10G1T Single-Port 10GBASE-T PCIe Network Expansion Card is a server network adapter with 1x 10GbE (NBASE-T 10G/5G/2.5G/1G/100M) RJ45 ports based on the Marvell AQtion (10GBASE-T) controller, in a PCIe Gen3 x4 low-profile card format. It adds high-throughput, low-latency Ethernet for virtualisation hosts, storage networks and busy application servers. For QNAP NAS and Windows/Linux PCs.

More bandwidth for every server.

Faster Server Connectivity for Data-Heavy Workloads

Onboard network ports quickly become a bottleneck when servers host virtual machines, storage traffic and backups at the same time.

The QNAP QXG-10G1T Single-Port 10GBASE-T PCIe Network Expansion Card adds 1x 10GbE (NBASE-T 10G/5G/2.5G/1G/100M) through RJ45 connections, giving each server more bandwidth and the ability to separate management, storage and application traffic.

Ports and Controller

1x 10GbE (NBASE-T 10G/5G/2.5G/1G/100M) RJ45 ports on the Marvell AQtion (10GBASE-T) controller. RJ45 ports use standard Cat6/Cat6a cabling.

Form Factor and Compatibility

PCIe Gen3 x4 low-profile card. Confirm the server model and slot type before installing.

Setup Instructions

How to Install the QNAP QXG-10G1T Single-Port 10GBASE-T PCIe Network Expansion Card

1. Power down the server, unplug it and use anti-static precautions.
2. Install the adapter in the matching slot and secure it.
3. Power on and install or update the network driver and firmware.
4. Connect cables or transceivers and configure the interfaces in the OS or hypervisor.