TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Rackmount Switch with 16-Port PoE+ (TL-SL1218MP) – 16x PoE+, 2x Gigabit RJ45/SFP combo, Unmanaged

The TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Rackmount Switch with 16-Port PoE+ is an unmanaged PoE switch with 16x 10/100 PoE+ and 2x Gigabit RJ45/SFP combo uplinks. It supplies 16x PoE+ power for access points, IP cameras and VoIP phones. It is built for home offices, small businesses and quick network expansion. Setup is plug-and-play, with no configuration required.

More ports, less clutter.

Power and Connect Devices Over One Cable

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Rackmount Switch with 16-Port PoE+ delivers 16x PoE+ power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 16x 10/100 PoE+. Uplinks: 2x Gigabit RJ45/SFP combo. PoE: 16x PoE+. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

No configuration needed – connect devices and go. Installs cleanly in standard network racks and cabinets.

Setup Instructions

How to Set Up the TP-Link TL-SL1218MP 16-Port 10/100Mbps + 2-Port Gigabit Rackmount Switch with 16-Port PoE+

1. Place the switch on a desk, wall or rack and connect the power adapter or power cord.
2. Connect one port to your router or main switch with an Ethernet cable.
3. Plug in your computers, access points, cameras and other devices.
4. Check the link and PoE LEDs to confirm powered devices start up.