Cisco Catalyst 9200 24-Port Multigigabit PoE+ Switch (C9200-24PXG-E) (CIC9224PXGE) – 24x PoE+, Layer 3 Managed

The Cisco Catalyst 9200 24-Port Multigigabit PoE+ Switch (C9200-24PXG-E) is a Layer 3 managed PoE switch with 24x RJ45 (multigigabit and Gigabit) PoE+ and modular uplinks (network module slot). It supplies 24x PoE+ power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers. Management features help segment and prioritise network traffic.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Catalyst 9200 24-Port Multigigabit PoE+ Switch (C9200-24PXG-E) delivers 24x PoE+ power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 24x RJ45 (multigigabit and Gigabit) PoE+. Uplinks: Modular uplinks (network module slot). PoE: 24x PoE+.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. Network Essentials licence and Cisco IOS XE.

Setup Instructions

How to Set Up the Cisco Catalyst 9200 24-Port Multigigabit PoE+ Switch (C9200-24PXG-E)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.