Cisco Business CBS220-8FP-E-2G 8-Port Gigabit Full PoE+ Smart Switch (CIS2208FPE2G) – 130W PoE, 2x Gigabit RJ45/SFP combo

The Cisco Business CBS220-8FP-E-2G 8-Port Gigabit Full PoE+ Smart Switch is a smart managed PoE switch with 8x Gigabit PoE+ and 2x Gigabit RJ45/SFP combo uplinks. It supplies 8x PoE+ power from a 130W budget for access points, IP cameras and VoIP phones. It is built for growing small and medium business networks.

More ports, less clutter.

Power and Connect Devices Over One Cable

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Business CBS220-8FP-E-2G 8-Port Gigabit Full PoE+ Smart Switch delivers 8x PoE+ power from a 130W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE+. Uplinks: 2x Gigabit RJ45/SFP combo. PoE: 8x PoE+, 130W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

VLANs, QoS, link aggregation and monitoring for growing networks. Fits on a desk or shelf, or mounts on a wall. Web UI, Cisco Business app and dashboard management.

Setup Instructions

How to Set Up the Cisco Business CBS220-8FP-E-2G 8-Port Gigabit Full PoE+ Smart Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.