Cisco Catalyst 1300 48-Port Gigabit PoE+ Managed Switch (C1300-48P-4X) (C1300-48P-4X) – 375W PoE, 4x 10G SFP+, Layer 3 Managed

The Cisco Catalyst 1300 48-Port Gigabit PoE+ Managed Switch (C1300-48P-4X) (part number CIC130048P4X) is a Layer 3 managed PoE switch with 48x Gigabit PoE+ and 4x 10G SFP+ uplinks. It supplies 48x PoE+ power from a 375W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

Connect, power and manage with confidence.

One Cable for Data and Power

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Catalyst 1300 48-Port Gigabit PoE+ Managed Switch (C1300-48P-4X) delivers 48x PoE+ power from a 375W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 48x Gigabit PoE+. Uplinks: 4x 10G SFP+. PoE: 48x PoE+, 375W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. Web UI, Cisco Business app and dashboard management.

Setup Instructions

How to Set Up the Cisco Catalyst 1300 48-Port Gigabit PoE+ Managed Switch (C1300-48P-4X)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.