HP LaserJet Pro 3001dw Wireless Monochrome Laser Printer – 35 ppm, Auto Duplex, Ethernet and Wi-Fi

The HP LaserJet Pro 3001dw is a compact monochrome laser printer for home offices and small teams that mainly print text. It produces 35 pages per minute, prints two-sided automatically, and connects over Wi-Fi, Ethernet, or USB while taking up little desk space.

Deep-Dive Story & Problem/Solution

Inkjets Are the Wrong Tool for High-Volume Text

Invoices, shipping labels, forms, and reports are black text. Printing them on an inkjet means slower pages, a higher cost per page, and cartridges that clog if left unused over a holiday.

The 3001dw is a dedicated mono laser. Toner is fused to paper, so pages are dry, sharp, and smudge-resistant, and the cartridge does not dry out. The first page arrives in about 6.6 seconds and the engine runs at 35 ppm, including in duplex mode.

Print resolution is 1200 x 1200 dpi. A duty cycle of up to 50,000 pages a month gives a wide margin for small-office volumes.

Fast, Sharp Black-and-White Printing

Small fonts and fine lines stay legible, which matters for contracts and barcodes. The 250-sheet tray and 150-sheet output bin support long unattended runs.

Simple to Place and Connect

At 14.4 x 15.7 x 8.6 inches, the printer suits tight spaces. Apple AirPrint, Mopria, Wi-Fi Direct, and the HP Smart app enable printing from phones and tablets.

Setup Instructions

How to Set Up the HP LaserJet Pro 3001dw

1. Unbox the printer and remove all tape and the cartridge protective strip.
2. Load paper in the 250-sheet tray and connect power.
3. Use the HP Smart app to connect over Wi-Fi, or plug in an Ethernet or USB cable.
4. Install the driver and print a test page.