Intel SSD D3-S4510 3.84TB 2.5″ SATA Enterprise SSD (SSDSC2KB038T801) – 6Gb/s, 3D TLC, Power-Loss Protection

Maximum SATA capacity per bay for read-heavy enterprise data.

The Intel SSD D3-S4510 3.84TB is a high-capacity 2.5-inch, 7mm SATA 6Gb/s enterprise SSD built with Intel 64-layer 3D TLC NAND. It delivers up to 560MB/s reads with power-loss protection and AES 256-bit encryption, ideal for consolidating read-intensive data such as content libraries, VM images and analytics.

Replacing Racks of Hard Drives With Dense SATA Flash

Read-heavy data like content libraries, VM images and analytics archives often sits on large hard-drive arrays, which consume power and limit throughput.

At 3.84TB per drive, the D3-S4510 lets you replace multiple hard drives with a single SATA SSD in each bay. Data loads faster, power and cooling costs drop, and existing SATA servers remain in service.

High Capacity With Consistent Latency

Enterprise firmware maintains steady latency across the full 3.84TB capacity, keeping content delivery and analytics reads fast under sustained load.

Built for Continuous Operation

Power-loss imminent protection, end-to-end data protection, AES 256-bit encryption and a 2-million-hour MTBF support 24/7 deployment.

Setup Instructions

How to Install the Intel D3-S4510 3.84TB

1. Back up data and check your server’s compatibility guidance for SATA SSDs.
2. Mount the SSD in a 2.5-inch server carrier or a 3.5-inch adapter tray.
3. Insert it into a SATA or SAS/SATA bay; hot-plug if the backplane supports it.
4. Configure the drive in your RAID controller or OS and create the volume.