Intel SSD D3-S4610 480GB 2.5″ SATA Enterprise SSD (SSDSC2KG480G801) – Mixed Use, 3D TLC

High-endurance SATA flash for server boot, log and cache roles.

The Intel SSD D3-S4610 480GB is a 2.5-inch, 7mm SATA 6Gb/s mixed-use enterprise SSD with Intel 64-layer 3D TLC NAND. Offering roughly 3 drive writes per day, power-loss protection and up to 560MB/s reads, it is well suited to server boot mirrors, logging and caching where writes are frequent.

The Right Drive for Server Boot and Log Volumes

Server boot drives and log volumes write constantly, even when applications are mostly reading. Consumer SSDs or read-intensive drives can wear out early in these roles.

The D3-S4610 480GB provides mixed-use endurance and enterprise data protection in a cost-effective capacity, making it a dependable choice for RAID 1 boot mirrors and log or cache volumes.

Reliable Mixed Read/Write Performance

Enterprise firmware delivers consistent latency for boot operations, logging and caching, even under steady write activity.

Enterprise Data Protection

Power-loss imminent protection, end-to-end data protection and AES 256-bit encryption, with a 2-million-hour MTBF.

Setup Instructions

How to Install the Intel D3-S4610 480GB

1. Back up data and confirm server compatibility guidance.
2. Mount the SSD in a 2.5-inch server carrier.
3. Insert it into a SATA or SAS/SATA bay; hot-plug if supported.
4. Create a RAID 1 boot mirror or configure it as a log or cache volume.