NETGEAR AV Line M4250-10G2XF-PoE++ Managed Switch (GSM4212UX) – 720W PoE, 2x 10G SFP+, L2+ Managed

The NETGEAR AV Line M4250-10G2XF-PoE++ Managed Switch (part number NEGSM4212UX) is an L2+ managed PoE switch with 8x Gigabit PoE++ (Ultra90) + 2x Gigabit RJ45 and 2x 10G SFP+ uplinks. It supplies 8x PoE++ (Ultra90) power from a 720W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The NETGEAR AV Line M4250-10G2XF-PoE++ Managed Switch delivers 8x PoE++ (Ultra90) power from a 720W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE++ (Ultra90) + 2x Gigabit RJ45. Uplinks: 2x 10G SFP+. PoE: 8x PoE++ (Ultra90), 720W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Inter-VLAN routing, ACLs and advanced QoS for business networks. Mounts under desks, on walls or behind screens. NETGEAR Engage controller and Insight support and Pro AV-ready configuration profiles.

Setup Instructions

How to Set Up the NETGEAR AV Line M4250-10G2XF-PoE++ Managed Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.