NETGEAR AV Line M4250-9G1F-PoE+ Managed Switch (GSM4210PD) – 110W PoE, 1x 1G SFP, L2+ Managed

The NETGEAR AV Line M4250-9G1F-PoE+ Managed Switch (part number NEGSM4210PD) is an L2+ managed PoE switch with 8x Gigabit PoE+ + 1x Gigabit RJ45 and 1x 1G SFP uplinks. It supplies 8x PoE+ power from a 110W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

More ports, less clutter.

Power and Connect Devices Over One Cable

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The NETGEAR AV Line M4250-9G1F-PoE+ Managed Switch delivers 8x PoE+ power from a 110W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE+ + 1x Gigabit RJ45. Uplinks: 1x 1G SFP. PoE: 8x PoE+, 110W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Inter-VLAN routing, ACLs and advanced QoS for business networks. Mounts under desks, on walls or behind screens. NETGEAR Engage controller and Insight support and Pro AV-ready configuration profiles.

Setup Instructions

How to Set Up the NETGEAR AV Line M4250-9G1F-PoE+ Managed Switch

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.