Ubiquiti UniFi Switch Pro XG 48 PoE (USW-Pro-XG-48-PoE) (UBPROXG48POE) – 1,080W PoE, 4x 25G SFP28, Layer 3 Managed

The Ubiquiti UniFi Switch Pro XG 48 PoE (USW-Pro-XG-48-PoE) is a Layer 3 managed PoE switch with 16x 2.5G + 32x 10G RJ45 PoE+++ and 4x 25G SFP28 uplinks. It supplies 48x PoE+++ (up to 90W/port) power from a 1,080W budget for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Ubiquiti UniFi Switch Pro XG 48 PoE (USW-Pro-XG-48-PoE) delivers 48x PoE+++ (up to 90W/port) power from a 1,080W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 16x 2.5G + 32x 10G RJ45 PoE+++. Uplinks: 4x 25G SFP28. PoE: 48x PoE+++ (up to 90W/port), 1,080W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. UniFi Network application management.

Setup Instructions

How to Set Up the Ubiquiti UniFi Switch Pro XG 48 PoE (USW-Pro-XG-48-PoE)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.