TP-Link TL-SG1218MP 18-Port Gigabit Rackmount Switch with 16-Port PoE+ (TL-SG1218MP) – 250W PoE, 2x Gigabit RJ45/SFP combo, Unmanaged

The TP-Link TL-SG1218MP 18-Port Gigabit Rackmount Switch with 16-Port PoE+ is an unmanaged PoE switch with 16x Gigabit PoE+ and 2x Gigabit RJ45/SFP combo uplinks. It supplies 16x PoE+ power from a 250W budget for access points, IP cameras and VoIP phones. It is built for home offices, small businesses and quick network expansion.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link TL-SG1218MP 18-Port Gigabit Rackmount Switch with 16-Port PoE+ delivers 16x PoE+ power from a 250W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 16x Gigabit PoE+. Uplinks: 2x Gigabit RJ45/SFP combo. PoE: 16x PoE+, 250W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

No configuration needed – connect devices and go. Installs cleanly in standard network racks and cabinets.

Setup Instructions

How to Set Up the TP-Link TL-SG1218MP 18-Port Gigabit Rackmount Switch with 16-Port PoE+

1. Place the switch on a desk, wall or rack and connect the power adapter or power cord.
2. Connect one port to your router or main switch with an Ethernet cable.
3. Plug in your computers, access points, cameras and other devices.
4. Check the link and PoE LEDs to confirm powered devices start up.