Fortinet FortiAP 223E (FAP-223E-A) Indoor Wireless Access Point – Dual-Radio 802.11ac Wave 2, 2×2 MU-MIMO

Reliable Wi-Fi 5 coverage for offices, schools and retail sites using FortiGate firewalls.

The Fortinet FAP-223E is a Wi-Fi 5 access point using 802.11ac Wave 2, delivering up to 867 Mbps (5 GHz) + 400 Mbps (2.4 GHz). It has 2 x Gigabit Ethernet ports and is powered by 802.3af/at PoE. Built for offices, schools and retail sites using FortiGate firewalls, it is managed through the FortiGate Wireless Controller.

Why Consumer Routers Struggle to Cover a Business

A single consumer router in a corner office leaves dead zones, slows down as more phones and laptops join, and offers no way to separate guests from staff. Range extenders add hops and cut throughput further.

The FAP-223E is designed to be placed where users are, on a ceiling or wall, and connected back to the network by Ethernet. Wi-Fi 5 Wave 2 MU-MIMO lets it transmit to several clients at the same time, improving performance in busy rooms.

Multiple SSIDs, VLAN tagging and guest isolation keep business and visitor traffic apart, and FortiGate Wireless Controller provides one place to configure, monitor and update every access point.

Performance Where Users Work

With up to 867 Mbps (5 GHz) + 400 Mbps (2.4 GHz), the FAP-223E handles video calls, cloud apps and file transfers for offices, schools and retail sites using FortiGate firewalls. Adding more access points on the same network extends coverage with seamless roaming between them.

Simple Installation and Management

Powered by 802.3af/at PoE lets the access point run from a single Ethernet cable, so it can be placed in the best spot for coverage rather than near a power outlet. Management via FortiGate Wireless Controller, FortiAP Cloud keeps firmware, settings and security consistent.

How to Set Up the Fortinet FAP-223E

1. Choose a central mounting position (ceiling or high on a wall) away from metal obstructions, and fit the mounting bracket.
2. Run an Ethernet cable from a PoE switch or injector to the access point and connect the 2 x Gigabit Ethernet ports.
3. Power on, then adopt or set up the access point using FortiGate Wireless Controller.
4. Create your SSIDs (staff and guest), set WPA2/WPA3 security and VLANs, and update to the latest firmware.