Intel FXXCBL350K 350W Server Power Supply (Delta DPS-350PB-1 C) for Intel SR1350-E

Restore an Intel SR1350-E server with its original-spec 350W supply.

The Intel FXXCBL350K is a 350W server power supply, built by Delta as the DPS-350PB-1 C, for the Intel SR1350-E server system. It accepts 100–240V AC input and uses the original mounting and connectors. It suits IT teams and integrators maintaining Intel-based server platforms still in service.

Keeping Intel Server Platforms Running

Intel-branded server systems are still used for appliances, legacy applications and lab environments. When the power supply fails, the server goes down and services stop until the part is replaced.

The FXXCBL350K is the Intel-specified supply for the SR1350-E. It fits the chassis and connects to the board without modification, returning the server to service with its original configuration.

Delta-Built Reliability

Delta Electronics manufactures many of Intel’s server power supplies. The DPS-350PB-1 C design provides stable output and integrated fan cooling suited to continuous server operation.

Correct Power for the Platform

A 350W rating covers the processor, memory, drives and expansion cards supported by the SR1350-E, with integrated protection against over-voltage, over-current and short circuits.

Setup Instructions

How to Replace the Intel FXXCBL350K

1. Shut down the server, unplug the AC cord and press the power button for a few seconds to drain residual power.
2. Open the side panel, photograph the cable routing, then disconnect the power cables from the motherboard, drives and any graphics card.
3. Remove the mounting screws or release latch, take out the old unit and install the replacement in the same position.
4. Reconnect every cable, close the case, plug in the AC cord and power on to confirm the system boots and the fan spins.