Delta PMC-24V035W1AA Panel Mount Power Supply — 24V DC, 1.5A, 35W for Industrial Control

A compact, dependable 24V source for control panels and automation equipment.

The Delta PMC-24V035W1AA is a 35W enclosed panel-mount power supply from Delta’s PMC series. It delivers 24V DC at 1.5A from a universal 85–264V AC input. It suits panel builders, automation engineers and OEMs powering sensors, relays, PLC I/O and small control loads.

Stable 24V Power for Small Control Loads

Control panels need a clean, stable 24V DC rail. Voltage dips or noise can cause relays to chatter, sensors to misread and PLC inputs to drop out, problems that are hard to diagnose in the field.

The PMC-24V035W1AA provides a regulated 24V output with protection against over-voltage, overload and short circuits. Its 35W rating is sized for small panels, where an oversized supply wastes space and money.

Universal Input for Global Equipment

The 85–264V AC input range covers mains voltages worldwide, so machine builders can use one part number for equipment shipped to different regions.

Compact Panel-Mount Construction

The enclosed metal housing mounts directly to a panel or chassis with screws and uses screw terminals for input and output wiring. It suits control cabinets, kiosks and OEM equipment.

Setup Instructions

How to Install the Delta PMC-24V035W1AA

1. Switch off and isolate the AC supply to the control panel, and confirm the circuit is de-energized before working.
2. Mount the unit on the DIN rail (or panel) with the recommended spacing above and below for natural convection cooling.
3. Wire L, N and protective earth to the input terminals, then connect the +V and -V outputs to the load using correctly sized wire and ferrules.
4. Restore power, check the DC OK LED, and measure the output voltage at the load; trim it with the adjustment potentiometer if required.