SanDisk Ultra 3D 2TB SATA 2.5-inch Internal SSD (SDSSDH3-2T00-G26) – SATA 6Gb/s, Up to 560 MB/s, 2.5″ (7mm)

The SanDisk Ultra 3D 2TB (SDSSDH3-2T00-G26) is a 2.5″ (7mm) SATA 6Gb/s solid state drive with up to 560 MB/s read and 530 MB/s write. It is a cost-effective upgrade for laptops and desktops still running on hard drives, and a reliable drive for everyday storage.

Reliable SSD performance for every day.

The Easiest Speed Upgrade for Laptops and Desktops

Most slow PCs are held back by their storage, not their processor. Hard drives have to physically move a read head across spinning platters, so booting, opening apps and searching files take seconds instead of milliseconds.

The SanDisk Ultra 3D 2TB replaces that mechanical drive with flash memory over the same SATA connection. Boot times, app launches and file searches drop dramatically, and the drive runs silently with no moving parts to wear out or break if dropped.

Drop-In Compatibility

The 2.5″ (7mm) form factor and SATA 6Gb/s interface work with older and current systems alike, so it can replace a hard drive or an older SSD without changing anything else.

Reliable Everyday Storage

Flash storage handles shocks and vibration better than hard drives, which matters most in laptops. Keep firmware updated with the manufacturer’s SSD tool for best reliability.

Setup Instructions

How to Install the SanDisk Ultra 3D 2TB

1. Back up your data, or clone your existing drive to the SSD using cloning software.
2. Power down and unplug the computer (remove the laptop battery if possible).
3. Mount the SSD in a drive bay or laptop caddy and connect SATA data and power cables.
4. Boot from the cloned drive, or install your OS and initialise the drive in Disk Management.