Intel CWA2-0650-10-IT01 (D23832-006) 650W Hot-Swap Redundant Power Supply for Intel Servers

Restore power redundancy on Intel servers with a 650W hot-swap module.

The Intel CWA2-0650-10-IT01 (Intel spare D23832-006) is a 650W hot-swap redundant power supply for Intel server systems, including the SR1550AL platform. It accepts 100–240V AC input and slides into the server’s power bay. It suits IT teams maintaining redundant power on Intel rack servers.

Restoring Redundancy Without a Maintenance Window

Rack servers with redundant power keep running when one supply fails, but they lose protection against a second failure. Waiting for the next maintenance window leaves that risk in place.

The CWA2-0650-10-IT01 is hot-swappable, so the failed module can be replaced while the server keeps running. Once inserted, it shares the load and redundancy is restored.

650W for Dual-Processor Servers

A 650W rating supports dual-processor Intel server configurations with full memory and drive loads, with integrated cooling and standard electrical protections.

Clear Part Matching

CWA2-0650-10-IT01 is the manufacturer model and D23832-006 is the Intel spare number. Either identifies the correct module for your server.

Setup Instructions

How to Replace the CWA2-0650-10-IT01

1. Confirm the part number is listed as supported for your Intel server, and confirm the other installed module is the same 650W model.
2. If the device has a second working power supply, leave it running; otherwise schedule a maintenance window and power the device down.
3. Disconnect the AC or DC cord from the failed unit, release the latch and slide it out, then slide the new module into the empty bay until it locks.
4. Connect the power cord, check that the PSU status LED turns green, and confirm in the device CLI or management interface that the supply reports OK.