HyperDrive GEN2 10-in-1 USB-C Docking Station (HD-G210) – 85W, 2 Displays

The HyperDrive GEN2 10-in-1 USB-C Docking Station connects to your laptop over USB-C 3.2 Gen 2 and adds HDMI, DisplayPort, USB-A, USB-C, Gigabit Ethernet and audio ports. It passes up to 85W of USB-C charging through to your laptop and drives dual displays. It is built for travel and laptops that are short on ports.

Fewer cables, more connections.

Add the Ports Your Laptop Left Out

Thin laptops and compact desktops often ship with only one or two ports, leaving no room for a monitor, USB drive, wired network and charger at the same time.

The HyperDrive GEN2 10-in-1 USB-C Docking Station adds HDMI, DisplayPort, USB-A, USB-C, Gigabit Ethernet and audio ports and passes up to 85W of USB-C charging through to your laptop. It drives dual displays, so you can connect a monitor or projector at the same time.

Multi-Display Support

Display support: Dual displays (4K 60Hz single, 4K 30Hz dual). Video outputs: 2x HDMI, 1x DisplayPort. Display count and resolution depend on your laptop’s graphics and connection.

Ports for Every Peripheral

USB connectivity: 2x USB-A 10Gbps, 2x USB-A 2.0; 1x USB-C PD input (100W). It also includes Gigabit Ethernet for wired networking and 3.5mm combo jack audio.

Setup Instructions

How to Set Up the HyperDrive GEN2 10-in-1 USB-C Docking Station

1. Plug the hub’s integrated cable into your laptop’s USB-C port.
2. For charging, connect your laptop’s USB-C power adapter to the hub’s Power Delivery input port.
3. Connect your monitor or projector to the HDMI port.
4. Plug in your USB devices and Ethernet cable.
5. Open your operating system’s display settings to arrange the external screen.