HyperDrive Thunderbolt 4 Docking Station (HDTB4D) – 96W, 2 Displays, 2.5GbE

The HyperDrive Thunderbolt 4 Docking Station connects to your laptop over Thunderbolt 4 and adds HDMI, USB-A, Thunderbolt 4, 2.5GbE, SD card and audio ports. It charges your laptop at up to 96W and drives dual 4K 60Hz, or single 8K 30Hz / 4K 120Hz displays. It is built for one-cable desks with high-resolution monitors.

One connection, every port you need.

One Cable for Your Whole Desk Setup

Plugging a charger, monitor cables, a network cable and several USB devices into a laptop every time you sit down wastes time and wears out its ports.

The HyperDrive Thunderbolt 4 Docking Station connects through Thunderbolt 4, charges your laptop at up to 96W, drives dual 4K 60Hz, or single 8K 30Hz / 4K 120Hz displays and adds HDMI, USB-A, Thunderbolt 4, 2.5GbE, SD card and audio ports. Unplug one cable and the laptop is ready to go.

Multi-Display Support

Display support: Dual 4K 60Hz, or single 8K 30Hz / 4K 120Hz. Video outputs: HDMI, Thunderbolt 4. Display count and resolution depend on your laptop’s graphics and connection.

Ports for Every Peripheral

USB connectivity: 4x USB-A 10Gbps; 2x Thunderbolt 4 downstream (40Gbps). It also includes 2.5GbE for wired networking, 3.5mm combo (up to 384kHz/32-bit) audio and SD UHS-II card slots.

Setup Instructions

How to Set Up the HyperDrive Thunderbolt 4 Docking Station

1. Connect the power adapter to the dock and a wall outlet.
2. Connect your monitors to the dock’s video outputs (HDMI, Thunderbolt 4).
3. Plug in your keyboard, mouse, Ethernet cable and other USB devices.
4. Connect the dock to your laptop’s Thunderbolt 4 / USB4 port with the included cable.
5. Open your display settings to arrange and extend your monitors.