Intel DC P4510 1TB U.2 NVMe Enterprise SSD (SSDPE2KX010T801) – PCIe 3.1 x4, 2.5″ 15mm

Proven NVMe performance and consistency for cloud and virtualization servers.

The Intel SSD DC P4510 1TB is a 2.5-inch, 15mm U.2 PCIe 3.1 x4 NVMe enterprise SSD built with Intel 64-layer 3D TLC NAND. It delivers up to 2,850MB/s reads and 465K random read IOPS with 1 DWPD endurance, optimized for cloud, virtualization and read-intensive data center workloads.

Why Cloud and Virtualization Servers Moved to NVMe

Dense virtualization and cloud hosts run dozens of workloads that compete for storage. SATA and SAS SSDs can become a bottleneck, raising latency for every VM on the host.

The P4510 connects storage directly over PCIe, delivering up to 465K random read IOPS per drive with consistent quality of service. Fewer drives provide more performance, improving VM density and application response times.

High Throughput for Read-Intensive Workloads

With up to 2,850MB/s sequential reads and 465K random read IOPS, the P4510 accelerates VM boot storms, databases, content delivery and analytics.

Enterprise-Grade Reliability

Power-loss imminent protection, end-to-end data protection and a 2-million-hour MTBF support continuous operation in hot-swap U.2 bays.

Setup Instructions

How to Install the Intel DC P4510 1TB

1. Confirm the server supports 2.5-inch U.2 NVMe drives and has current firmware.
2. Mount the SSD in the server’s drive carrier.
3. Insert it into the NVMe bay; hot-plug where supported.
4. Verify the drive with the BMC or ‘nvme list’, then create volumes or add it to your storage pool.