Kensington SD4855P USB-C 10Gbps Driverless Docking Station (K33575NA) – 100W, 3 Displays

The Kensington SD4855P USB-C 10Gbps Driverless Docking Station connects to your laptop over USB-C and adds HDMI, DisplayPort, USB-A, USB-C, Gigabit Ethernet, SD card and audio ports. It charges your laptop at up to 100W and drives up to 3 displays at 4K 60Hz. It is built for home offices, hot desks and hybrid teams.

One connection, every port you need.

One Cable for Your Whole Desk Setup

Plugging a charger, monitor cables, a network cable and several USB devices into a laptop every time you sit down wastes time and wears out its ports.

The Kensington SD4855P USB-C 10Gbps Driverless Docking Station connects through USB-C, charges your laptop at up to 100W, drives up to 3 displays at 4K 60Hz and adds HDMI, DisplayPort, USB-A, USB-C, Gigabit Ethernet, SD card and audio ports. Unplug one cable and the laptop is ready to go.

Multi-Display Support

Display support: Up to 3 displays at 4K 60Hz (DP 1.4 host). Video outputs: 2x DisplayPort++, 1x HDMI. Display count and resolution depend on your laptop’s graphics and connection.

Ports for Every Peripheral

USB connectivity: 1x USB-A 10Gbps, 4x USB-A 5Gbps; 1x USB-C 10Gbps. It also includes Gigabit Ethernet for wired networking, 3.5mm combo jack audio and SD 4.0 (UHS-II) card slots.

Setup Instructions

How to Set Up the Kensington SD4855P USB-C 10Gbps Driverless Docking Station

1. Connect the power adapter to the dock and a wall outlet.
2. Connect your monitors to the dock’s video outputs (2x DisplayPort++, 1x HDMI).
3. Plug in your keyboard, mouse, Ethernet cable and other USB devices.
4. Connect the dock to your laptop’s USB-C port with the included cable.
5. Open your display settings to arrange and extend your monitors.