TP-Link Omada SG5452XMPP 52-Port Gigabit Stackable L3 Lite Switch with 48-Port PoE (SG5452XMPP) – 770W PoE, 4x 10G SFP+, Layer 3 Managed

The TP-Link Omada SG5452XMPP 52-Port Gigabit Stackable L3 Lite Switch with 48-Port PoE is a Layer 3 managed PoE switch with 48x Gigabit RJ45 (8 PoE++, 40 PoE+) and 4x 10G SFP+ uplinks. It supplies 8x PoE++ + 40x PoE+ power from a 770W budget for access points, IP cameras and VoIP phones.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link Omada SG5452XMPP 52-Port Gigabit Stackable L3 Lite Switch with 48-Port PoE delivers 8x PoE++ + 40x PoE+ power from a 770W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 48x Gigabit RJ45 (8 PoE++, 40 PoE+). Uplinks: 4x 10G SFP+. PoE: 8x PoE++ + 40x PoE+, 770W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. Stackable and Omada SDN management.

Setup Instructions

How to Set Up the TP-Link Omada SG5452XMPP 52-Port Gigabit Stackable L3 Lite Switch with 48-Port PoE

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the cloud dashboard or app and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.