Networking
Shop all 595 productsUpgrade Catalyst 9200 uplinks without replacing the switch.
The Cisco C9200-NM-4X is a field-replaceable uplink network module for Catalyst 9200 switches, providing 4 x 10G/1G SFP+. It is used to add four 10G or 1G fiber uplinks to a modular Catalyst 9200 switch, giving network teams a simple way to change uplink speed and media as the network grows.
Why Modular Uplinks Protect Your Switch Investment
Fixed-uplink switches lock you into one uplink speed. When the core moves from 1G to 10G, or a new building needs a fiber link, the only option is often to replace the entire switch, along with its cabling and configuration work.
The C9200-NM-4X solves this by placing the uplink ports on a removable module. You choose the uplink type that fits today, then swap or upgrade the module later, while the access ports, PoE and configuration of the Catalyst 9200 stay in place.
Because the module is a genuine Cisco part designed for the Catalyst 9200 uplink slot, it is detected automatically and managed from the same CLI and management tools as the rest of the switch.
4 x 10G/1G SFP+
The C9200-NM-4X provides 4 x 10G/1G SFP+. SFP+ ports accept 10GBASE-SR, LR and DAC cables, and also run at 1G with SFP modules for mixed environments.
Simple Installation and Upgrades
The module slides into the uplink slot at the front of the switch. This keeps maintenance windows short and lets you stock a spare module instead of a spare switch.
How to Install the Cisco C9200-NM-4X
- Confirm your switch model and software release support the C9200-NM-4X (check the Cisco compatibility matrix).
- Remove the blank cover or existing module from the uplink slot and insert the C9200-NM-4X until it seats firmly, then tighten the captive screws.
- Insert the required SFP or SFP+ modules or cables and connect them to the upstream switch.
- Verify the module with “show inventory” and “show interfaces status”, then configure the uplinks as trunks or EtherChannel members.











Reviews
There are no reviews yet.