Cisco Catalyst C1000-16T-2G-L 16-Port Gigabit Ethernet Switch – 2x 1G SFP Uplinks, Layer 2 Managed

Business-grade Cisco switching for 16 devices.

The Cisco C1000-16T-2G-L is a 16-port Gigabit Ethernet switch from the Catalyst 1000 Series, with two 1G SFP uplinks for fiber or copper SFP modules. It is built for small offices and branch sites with 10 to 15 wired devices that need Cisco-grade Layer 2 management, security and reliability without enterprise licensing costs.

Why Unmanaged and Consumer Switches Fall Short in a Business Network

An unmanaged switch connects devices, but it gives you no control over who connects, how traffic is prioritized, or what happens when a cable loop takes the network down. As an office grows, those gaps turn into broadcast storms, open ports anyone can plug into, and no visibility when users report slow connections.

The C1000-16T-2G-L adds the controls a business network needs: up to 256 active VLANs to separate staff, guest and device traffic; IEEE 802.1X and port security to block unauthorized devices; Spanning Tree to stop loops; and QoS so voice and video traffic are handled first. It does this on Cisco IOS-based software, so configuration is familiar to any network technician.

Performance stays predictable because the switching fabric is non-blocking: 36 Gbps of capacity and a 26.78 Mpps forwarding rate cover every port at line rate, plus the uplinks.

Gigabit Uplinks for Fiber or Copper Links

The 2 x 1G SFP ports let you connect this switch to a core switch or another closet over fiber, which supports longer distances than copper and is immune to electrical interference. Use Cisco 1000BASE-SX or LX SFP modules depending on distance.

Silent, Fanless Design

With no internal fan, the C1000-16T-2G-L runs silently and has fewer moving parts to wear out, which suits desks, classrooms, shops and meeting rooms. Its compact 1RU chassis can sit on a desk, mount on a wall, or go into a rack. It operates from -5°C to 50°C at sea level.

How to Set Up the Cisco C1000-16T-2G-L

1. Mount the switch on a desk, wall or 19-inch rack, leaving the side vents clear, then connect power.
2. Connect your uplink to the core switch or router through an SFP module or copper cable on the uplink ports, then cable your end devices to the Gigabit ports.
3. Open the web UI from a browser (or use the console port and CLI), set an admin password and management IP, and update to the latest Cisco firmware.
4. Create VLANs for staff, guest, voice and device traffic, enable Spanning Tree and port security, and save the configuration.