Cisco Catalyst 9200L 24-Port Gigabit PoE+ Switch (C9200L-24P-4) (CIC9200L24P4) – 24x PoE+, 4x fixed uplinks, Layer 3 Managed

The Cisco Catalyst 9200L 24-Port Gigabit PoE+ Switch (C9200L-24P-4) is a Layer 3 managed PoE switch with 24x Gigabit PoE+ and 4x fixed uplinks. It supplies 24x PoE+ power for access points, IP cameras and VoIP phones. It is built for business access and aggregation layers. Management features help segment and prioritise network traffic.

More ports, less clutter.

Power and Connect Devices Over One Cable

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The Cisco Catalyst 9200L 24-Port Gigabit PoE+ Switch (C9200L-24P-4) delivers 24x PoE+ power over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 24x Gigabit PoE+. Uplinks: 4x fixed uplinks. PoE: 24x PoE+.

Management and Installation

Routes between VLANs and subnets directly on the switch. Installs cleanly in standard network racks and cabinets. Cisco IOS XE.

Setup Instructions

How to Set Up the Cisco Catalyst 9200L 24-Port Gigabit PoE+ Switch (C9200L-24P-4)

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.