Plugable 10-in-1 USB-C 3.2 Gen 2 Hub (USBC-10IN1E) – 125W, 8K HDMI, 2.5GbE

The Plugable 10-in-1 USB-C 3.2 Gen 2 Hub connects to your laptop over USB-C and adds HDMI, USB-A, USB-C, 2.5GbE and SD card reader ports. It passes up to 125W of USB-C charging through to your laptop and drives a single display, 4K 144Hz or 8K 30Hz. It is built for travel and laptops that are short on ports.

Fewer cables, more connections.

Add the Ports Your Laptop Left Out

Thin laptops and compact desktops often ship with only one or two ports, leaving no room for a monitor, USB drive, wired network and charger at the same time.

The Plugable 10-in-1 USB-C 3.2 Gen 2 Hub adds HDMI, USB-A, USB-C, 2.5GbE and SD card reader ports and passes up to 125W of USB-C charging through to your laptop. It drives a single display, 4K 144Hz or 8K 30Hz, so you can connect a monitor or projector at the same time.

External Display Output

Display support: Single display, 4K 144Hz or 8K 30Hz. Video outputs: 1x HDMI 2.1. Display count and resolution depend on your laptop’s graphics and connection.

Ports for Every Peripheral

USB connectivity: 1x USB-A 10Gbps, 2x USB-A 5Gbps; 2x USB-C 10Gbps. It also includes 2.5GbE for wired networking and SD + microSD (UHS-I) card slots.

Setup Instructions

How to Set Up the Plugable 10-in-1 USB-C 3.2 Gen 2 Hub

1. Plug the hub’s integrated cable into your laptop’s USB-C port.
2. For charging, connect your laptop’s USB-C power adapter to the hub’s Power Delivery input port.
3. Connect your monitor or projector to the HDMI 2.1 port.
4. Plug in your USB devices, Ethernet cable and memory cards.
5. Open your operating system’s display settings to arrange the external screen.