Seagate Exos M 30TB Enterprise Hard Drive (ST30000NM004K) — 7200 RPM, SATA 6Gb/s, 512MB Cache

The Seagate Exos M 30TB (ST30000NM004K) is a 3.5-inch, 7200 RPM enterprise hard drive with a SATA 6Gb/s interface and 512MB cache. Rated at 2,500,000 hours MTBF, it is designed for 24/7 data center operation and suits dense data center racks, cloud object storage and large backup repositories.

Deep-Dive Story & Problem/Solution

Why Servers Need Enterprise-Class Drives

Servers and storage arrays run continuously under heavy random and sequential workloads, in chassis packed with spinning disks. Consumer and NAS drives are not rated for those workloads or for the rotational vibration of dense enclosures, which leads to throttled performance, timeouts and early failures across a fleet.

Seagate Exos M drives are built for that duty. The ST30000NM004K is rated for 550TB per year and carries a 2,500,000 hours MTBF rating, with firmware designed to maintain throughput in RAID and multi-drive systems. Its helium-sealed design lowers power and heat per terabyte in dense racks.

Exos M is built on Seagate’s Mozaic 3+ platform, which uses heat-assisted magnetic recording (HAMR) to reach 3TB+ per platter. Data is still written in conventional, non-overlapping tracks, so it avoids the rebuild penalties of SMR drives while delivering more capacity per rack slot.

SATA 6Gb/s — Broad Server Compatibility

The SATA 6Gb/s interface works with standard server HBAs, RAID controllers and SAS backplanes, making the drive easy to deploy in new builds or as a replacement in existing arrays.

Built for 24/7 Data Center Reliability

With 30TB of capacity and a 512MB cache, the ST30000NM004K delivers consistent performance for backup repositories, distributed file systems such as Ceph and Hadoop, and virtualization datastores. Its reliability rating supports predictable fleet planning.

Setup Instructions

How to Install the Seagate Exos M 30TB in a Server or Storage Array

1. Confirm your server, HBA or RAID controller supports SATA 6Gb/s drives at this capacity, and update controller firmware if needed.
2. Mount the drive in a compatible 3.5-inch carrier and insert it into the bay (hot-swap where the backplane supports it).
3. Verify the controller detects the drive, then initialise it or add it to a new or existing RAID group or storage pool.
4. Enable S.M.A.R.T. or controller-level health monitoring and alerts as part of standard maintenance.