Seagate IronWolf Pro 32TB NAS Hard Drive (ST32000NT000) – SATA 6Gb/s, 7200 RPM, 512MB Cache, CMR

The Seagate IronWolf Pro 32TB (ST32000NT000) is a 3.5-inch CMR NAS hard drive for businesses, creative teams and IT integrators running NAS arrays of up to 24 bays. IronWolf Health Management, RV sensors and 7200 RPM operation keep RAID storage reliable around the clock.

CMR NAS capacity tuned for multi-bay RAID.

Keeping Multi-Bay NAS Arrays Healthy and Fast

NAS drives spin 24/7 next to other drives, absorbing vibration and heat that desktop drives are not built to tolerate. SMR desktop drives add a further risk by slowing down sharply during RAID rebuilds.

The Seagate IronWolf Pro 32TB is designed for NAS. CMR recording keeps rebuilds predictable, RV sensors counter vibration, and IronWolf Health Management reports drive condition inside compatible NAS software. At 32TB per drive, it delivers some of the highest capacity per bay available, so NAS pools reach large usable sizes with fewer drives and less power per terabyte.

IronWolf Health Management

IHM integrates with Synology DSM, QNAP QTS and Asustor ADM to run health checks and give prevention, intervention and recovery recommendations before problems become data loss.

Built for Multi-Bay Enclosures

RV sensors and NAS-tuned firmware maintain performance in arrays of up to 24 bays with a 550TB/year workload rating.

Setup Instructions

How to Install the Seagate IronWolf Pro 32TB

1. Check your NAS compatibility list and power down unless hot-swap is supported.
2. Mount the drive in a tray or bay.
3. Power on and let the NAS detect the drive, then create or expand a storage pool.
4. Enable IronWolf Health Management and scheduled S.M.A.R.T. tests in your NAS software.