Toshiba S300 Pro 10TB Surveillance Hard Drive (HDWTA1AUZSVAR) – SATA 6Gb/s, 7200 RPM, 512MB Cache, CMR

The Toshiba S300 Pro 10TB (HDWTA1AUZSVAR) is a 3.5-inch CMR hard drive for surveillance NVRs with up to 64 cameras and 24 bays. With 7200 RPM operation, a 512MB cache and SATA 6Gb/s connectivity, it gives CCTV installers dependable capacity for always-on workloads.

10TB of CMR storage tuned for surveillance workloads.

Built for the Demands of Surveillance Storage

Surveillance recorders write many camera streams continuously; desktop drives can drop frames and fail early under that load.

The Toshiba S300 Pro 10TB is engineered for this role with CMR recording, rotational vibration sensors and firmware tuned for surveillance duty (camera support: Up to 64 cameras). At 10TB, it gives growing surveillance deployments room for several years of data growth per bay.

Performance Where It Counts

A 7200 RPM spindle and 512MB cache deliver sustained throughput for multi-camera recording and playback. The SATA 6Gb/s interface is backward compatible with SATA 3Gb/s ports and works with standard SATA controllers, NAS bays and server backplanes.

Reliability for Continuous Operation

Toshiba’s rotational vibration sensors and firmware tuning keep the drive stable in multi-bay enclosures running around the clock.

Setup Instructions

How to Install the Toshiba S300 Pro 10TB

1. Check your system supports 3.5-inch SATA drives at this capacity and power it down unless hot-swap is supported.
2. Mount the drive in a free bay or tray.
3. Connect or insert the drive and confirm detection in the BIOS, NAS software or recorder.
4. Initialise the drive, add it to a pool or RAID if needed, and enable health monitoring.