TP-Link TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ (TL-SG1210MPE) – 123W PoE, 1x 1G SFP

The TP-Link TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ (part number TL-SG1210MPE) is an easy smart managed PoE switch with 8x Gigabit PoE+ + 1x Gigabit RJ45 and 1x 1G SFP uplinks. It supplies 8x PoE+ power from a 123W budget for access points, IP cameras and VoIP phones.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+ delivers 8x PoE+ power from a 123W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 8x Gigabit PoE+ + 1x Gigabit RJ45. Uplinks: 1x 1G SFP. PoE: 8x PoE+, 123W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

VLANs, QoS and IGMP snooping through a simple web interface or app. Fits on a desk or shelf, or mounts on a wall.

Setup Instructions

How to Set Up the TP-Link TL-SG1210MPE 10-Port Gigabit Easy Smart Switch with 8-Port PoE+

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.