TP-Link TL-SG1428PE 28-Port Gigabit Easy Smart Switch with 24-Port PoE+ (TL-SG1428PE) – 250W PoE, 2x 1G SFP

The TP-Link TL-SG1428PE 28-Port Gigabit Easy Smart Switch with 24-Port PoE+ is an easy smart managed PoE switch with 24x Gigabit PoE+ + 2x Gigabit RJ45 and 2x 1G SFP uplinks. It supplies 24x PoE+ power from a 250W budget for access points, IP cameras and VoIP phones. It is built for small offices that want basic control without complexity.

Reliable connections for every device.

Simplify Installs with Power over Ethernet

Running separate power to every access point, camera and phone adds cost and limits where devices can go, while power bricks clutter ceilings and walls.

The TP-Link TL-SG1428PE 28-Port Gigabit Easy Smart Switch with 24-Port PoE+ delivers 24x PoE+ power from a 250W budget over standard Ethernet, so devices can be installed wherever a network cable can reach.

Ports and Performance

Ports: 24x Gigabit PoE+ + 2x Gigabit RJ45. Uplinks: 2x 1G SFP. PoE: 24x PoE+, 250W budget. SFP/SFP+ ports require compatible transceivers or DAC cables.

Management and Installation

VLANs, QoS and IGMP snooping through a simple web interface or app. Installs cleanly in standard network racks and cabinets.

Setup Instructions

How to Set Up the TP-Link TL-SG1428PE 28-Port Gigabit Easy Smart Switch with 24-Port PoE+

1. Mount the switch and connect power.
2. Connect an uplink port to your router or core switch.
3. Open the web interface and adopt or log in to the switch, then update the firmware.
4. Create VLANs and QoS rules, then connect your devices.