Ubiquiti UACC-OM-SM-10G-S-2 10G Single-Mode BiDi SFP+ Optical Module (2-Pack) (UACC-OM-SM-10G-S-2) – 10km, Single-mode fiber, LC simplex

The Ubiquiti UACC-OM-SM-10G-S-2 10G Single-Mode BiDi SFP+ Optical Module (2-Pack) is a 2-pack of 10G BiDi SFP+ modules for Single-mode fiber (single strand) links up to 10km. It connects switches, servers and storage over fiber, extending links well beyond copper distance limits. It uses an LC simplex connector.

Plug in, link up.

Longer, Faster Links Over Fiber

Copper Ethernet is limited to around 100 meters, which is not enough between floors, buildings or data centre rows.

The Ubiquiti UACC-OM-SM-10G-S-2 10G Single-Mode BiDi SFP+ Optical Module (2-Pack) provides 10G over Single-mode fiber (single strand) up to 10km, plugging straight into a compatible port.

Optical and Electrical Specifications

Form factor: SFP+. Speed: 10G. Media: Single-mode fiber (single strand). Wavelength: BiDi pair. Reach: 10km. Connector: LC simplex.

Installation and Compatibility

Insert the module into a matching port until it clicks, then connect the cable. Use matching module types on both ends of the link.

Setup Instructions

How to Install the Ubiquiti UACC-OM-SM-10G-S-2 10G Single-Mode BiDi SFP+ Optical Module (2-Pack)

1. Check that the host port supports this module type and speed.
2. Remove the dust cap and insert the module until it latches.
3. Connect the fiber or copper cable (use the matching BiDi pair on the far end).
4. Confirm the link LED and port status in the switch or device interface.